User Manual - Page 202

For 2018 WRX WRX PREMIUM.

Loading ...
Loading ...
Loading ...
(207,1)
Model "A1700BE-B" EDITED: 2017/ 10/ 11
When exiting:
While the welcome lighting function is
activated, some exterior lights will remain
illuminated even when either of the follow-
ing operations is performed.
. Turning the push-button ignition switch
to the OFF status (models with keyless
access with push-button start system)
. Pulling out the key from the ignition
switch (models without keyless access
with push-button start system)
The exterior lights will turn off under any of
the following conditions.
. 3 minutes have passed since the
exterior lights w ere illuminated by the
welcome lighting function.
. 30 seconds have passed since the door
was opened and closed.
*1
. The light control switch is turned to a
position other than AUTO.
. The locking procedures using the key-
less access function (if equipped) or the
remote keyless entry system is performed
twice. When performing the unlocking
proce dure after performing the locking
procedure, perform the locking procedure
twice again.
*1: The setting for the period of time in which the
exterior lights remain on by the welcome lighting
function can be changed by a SUBARU dealer.
Contact your SUBARU dealer for details.
! Sensor for the auto on/off head-
lights (if equipped)
The sensor is on the instrument panel as
shown in the illustration.
CAUTION
If any object is placed on or near the
sensor, the sensor may not detect
the level of the ambient light cor-
rectly and the auto on/off headlights
may not operate properly.
& High/low beam change
(dimmer)
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light
on the combina-
tion meter is also on.
To switch back to low beam, pull the lever
back to the center position.
! High beam assist function (models
with the EyeSight system)
NOTE
. The high beam assist function uti-
lizes the stereo camera installed at the
position of the front map lights.
. For details on how to handle the
stereo camera, refer to the Owners
Manual supplement for the EyeSight
CONTINUED
Instruments and controls/Light control switch
3-65
3
Loading ...
Loading ...
Loading ...