Loading ...
Loading ...
Loading ...
(453,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
& Precautions for TYPE RA
The roof carri er and other equipment
cannot be attached on the carbon roof
because of the design.
WARNING
Do not place a roof carrier or any
other equipment on the roof of the
vehicle. Due to the design of the
roof, the cargo may fall off and cause
an accident.
& Roof molding and crossbar (if
equipped)
CAUTION
. For cargo carrying purposes, the
roof molding must be used to-
gether with a roof crossbar kit
and the appropriate carrying at-
tachment. Otherwise, damage to
the roof or paint or a dangerous
road hazard due to loss of cargo
could result.
. When using the roof crossbar kit,
make sure that the total weight of
the crossbars, carrying attach-
ment and cargo does not exceed
the maximum load limit. Over-
loading may cause damage to
the vehicle and create a safety
hazard.
Cargo can be carried after securing the
roof crossbar kit to the roof molding and
installing the appropriate carrying attach-
ment. When installing the roof crossbar kit,
follow the manufacturer’s instructions.
When carrying cargo on the roof using the
roof crossbar kit and carrying attachments,
never exceed the maximum load limit as
explained below. You should also be
careful that the vehicle does not exceed
the Gross Vehicle Weight Rating (GVWR)
and front and rear Gross Axle Weight
Rating (GAWR). For information about
loading cargo into or onto your vehicle,
refer to “Loading your vehicle” F8-11. The
maximum total load on the roof (including
crossbars, carrying attachments and car-
go) must not exceed 88 lbs (40 kg). Refer
to the crossbar installation instructions for
the maximum crossbar capacity. Place the
– CONTINUED –
Driving tips/Loading your vehicle
8-13
8
Loading ...
Loading ...
Loading ...