Loading ...
Loading ...
Loading ...
(410,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
NOTE
. IfyoupressandholdtheAuto
Vehicle Hold switch for more than 30
seconds, the Auto Vehicle Ho ld ON
indicator light will turn off, and the
system will ignore any further pressing
of the switch. To activate the switch
again, restart the engine.
. When the Auto Vehicle Hold function
is deactivated while the Auto Vehicle
Hold function has a malfunction, if you
press the Auto Vehicle Hold switch, a
chirp will sound
& To operate the Auto Vehicle
Hold function
Stop the vehicle by depressing the brake
pedal when all of the following conditions
are m et. Then the Auto Vehicle Hold
function will operate.
. All doors are closed.
. The driver’s seatbelt is fastened.
. The select lever is in a position other
than the “P” position.
Auto Vehicle Hold operation indicator light
While the vehicle is kept stopped by the
Auto Vehicle Hold fun ction, the Auto
Vehicle Hold operation indicator light will
illuminate.
& To release the Auto Vehicle
Hold function
Perform any of the following operations to
release the Auto Vehicle Hold function.
. Depress the accelerator pedal.
. Depress the brake pedal again.
. Apply the electronic parking brake.
. Shift the select lever to the “P” position
with the brake pedal pressed.
. Press the Auto Vehicle Hold switch with
the brake pedal pressed.
When the Auto Vehicle Hold function is
released, the Auto Vehicle Hold operation
indicator light will turn off.
Under any of the following conditions, the
Auto Vehicle Hold function will be auto-
matically released and the electronic
parking brake will be automatically ap-
plied.
. The Auto Vehicle Hold function has
been in operation for 10 minutes.
. The driver’s seatbelt is unfastened.
. The driver’s door is opened.
. The ignition switch is turned to the
“LOCK”/“OFF” position.
. The vehicle is stopped on a steep
slope.
. The Auto Vehicle Hold function is
malfunctioning.
In such cases, the Auto Vehicle Hold
operation indicator light will turn off and
the indicator light on the parking brake
switch will illuminate.
& Tips
. When the electronic parking brake is
automatically applied with the vehicle kept
stopped by the Auto Vehicle Hold function,
release the electronic parking brake by
either of the following operations before
starting off. Then make sure that the
Starting and operating/Auto Vehicle Hold function
7-48
Loading ...
Loading ...
Loading ...