Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 63
Touchscreen
Use the small blower icon to reduce the blower
setting and the large blower icon to increase the
blower setting. Blower can also be selected by
pressing the blower bar area between the icons.
Mode Control
Select Mode by pressing one of the
Mode buttons on the touchscreen to
change the airflow distribution mode.
The airflow distribution mode can be
adjusted so air comes from the instrument
panel outlets, floor outlets, defrost outlets, and
demist outlets.
Panel Mode
Selecting this mode from the
touchscreen causes air to flow from
the outlets in the instrument panel.
Each of these outlets can be
individually adjusted to direct the flow of air.
The air vanes of the center outlets and outboard
outlets can be moved up and down or side to
side to regulate airflow direction. There is a shut
off wheel located below the air vanes to shut off
or adjust the amount of airflow from these
outlets.
Bi-Level Mode
Selecting this mode from the
touchscreen causes air to flow from
the instrument panel outlets and floor
outlets. A slight amount of air is
directed through the defrost and side window
demister outlets.
NOTE:
Bi-Level mode is designed under comfort condi-
tions to provide cooler air out of the panel
outlets and warmer air from the floor outlets.
Floor Mode
Selecting this mode from the
touchscreen causes air to flow from
the floor outlets. A slight amount of air
is directed through the defrost and
side window demister outlets.
Mix Mode
Selecting this mode from the
touchscreen causes air to flow
through the floor, defrost, and side
window demister outlets. This setting
works best in cold or snowy conditions that
require extra heat to the windshield. This setting
is good for maintaining comfort while reducing
moisture on the windshield.
Climate Control OFF Button
Press and release the OFF button on
the touchscreen, or push the OFF
button on the faceplate to turn the
Climate Control ON/OFF.
AUTOMATIC TEMPERATURE CONTROL
(ATC) — I
F EQUIPPED
Automatic Operation
1. Push the AUTO button on the faceplate, or
the AUTO button on the touchscreen on the
Automatic Temperature Control (ATC)
Panel.
2. Next, adjust the temperature that you would
like the system to maintain by adjusting the
driver and passenger temperature control
buttons. Once the desired temperature is
displayed, the system will achieve and
automatically maintain that comfort level.
3. When the system is set up for your comfort
level, it is not necessary to change the
settings. You will experience the greatest
efficiency by simply allowing the system to
function automatically.
2
21_KL_OM_EN_USC_t.book Page 63
Loading ...
Loading ...
Loading ...