Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 119
SPORT — If Equipped
This mode alters the transmission's automatic
shift schedule for sportier driving. Upshift
speeds are increased to make full use of
available engine power.
SPORT mode is activated using the rotary switch
on the center console Ú page 124.
Transmission Limp Home Mode
Transmission function is monitored
electronically for abnormal conditions.
If a condition is detected that could result in
transmission damage, Transmission Limp
Home Mode is activated. In this mode, the
transmission may operate only in a fixed gear,
or may remain in NEUTRAL. The Malfunction
Indicator Light (MIL) may be illuminated. Limp
Home Mode may allow the vehicle to be driven
to an authorized dealer for service without
damaging the transmission.
In the event of a momentary problem, the
transmission can be reset to regain all forward
gears by performing the following steps:
1. Stop the vehicle.
2. Shift the transmission into PARK.
3. Turn the ignition to the OFF position.
4. Wait approximately 10 seconds.
5. Restart the engine.
6. Shift into the desired gear range. If the
problem is no longer detected, the
transmission will return to normal
operation.
NOTE:
Even if the transmission can be reset, we
recommend that you visit an authorized dealer
at your earliest possible convenience. An autho-
rized dealer has diagnostic equipment to
assess the condition of your transmission. If the
transmission cannot be reset, authorized dealer
service is required.
AutoStick
AutoStick is a driver-interactive transmission
feature providing manual shift control, giving you
more control of the vehicle. AutoStick allows
you to maximize engine braking, eliminate
undesirable upshifts and downshifts, and
improve overall vehicle performance. This system
can also provide you with more control during
passing, city driving, cold slippery conditions,
mountain driving, trailer towing and many other
situations.
Operation
When the gear selector is in the AutoStick
position (beside the DRIVE position), it can be
moved forward and rearward. This allows the
driver to manually select the transmission gear
being used. Moving the gear selector forward (-)
triggers a downshift, and rearward (+) an
upshift. The current gear is displayed in the
instrument cluster.
NOTE:
In AutoStick mode, the transmission will only
shift up or down when the driver moves the gear
selector rearward (+) or forward (-), except as
described below.
The transmission will automatically upshift
when necessary to prevent engine over-
speed.
The transmission will automatically down-
shift as the vehicle slows (to prevent engine
lugging) and will display the current gear.
The transmission will automatically down-
shift to FIRST or SECOND gear (depending on
model) when coming to a stop. After a stop,
the driver should manually upshift (+) the
transmission as the vehicle is accelerated.
4
21_KL_OM_EN_USC_t.book Page 119
Loading ...
Loading ...
Loading ...