Loading ...
Loading ...
Loading ...
340 IN CASE OF EMERGENCY
NOTE:
Passengers should not remain in the vehicle
when the vehicle is being lifted or raised.
JACK LOCATION /SPARE TIRE STOWAGE
The jack, wheel chocks, and spare tire are stowed
under the load floor behind the rear seat.
1. Open the liftgate.
2. Lift the load floor handle, then lift access
cover to locate jack and tools.
Load Floor Handle
3. Remove the hook from the stowed position
on the back side of the load floor and place
the hook over the top body flange and
weather seal. This will hold the load floor up
while obtaining the jack and spare tire.
4. Remove the fastener securing the jack and
spare tire.
Removing Jack And Spare Tire Fastener
5. Remove the chocks.
6. Remove the scissors jack and wheel bolt
wrench from the spare wheel as an
assembly. Turn the jack screw to the left to
loosen the wheel bolt wrench, and remove
the wrench from the jack assembly.
Jack And Tool Assembly
NOTE:
The jack handle attaches to the side of the jack
with two attachment points. When the jack is
partially expanded, the tension between the two
attachment points holds the jack handle in place.
7. Remove the spare tire.
WARNING!
A loose tire or jack thrown forward in a
collision or hard stop could endanger the
occupants of the vehicle. Always stow the jack
parts and the spare tire in the places
provided. Have the deflated (flat) tire repaired
or replaced immediately.
21_KL_OM_EN_USC_t.book Page 340
Loading ...
Loading ...
Loading ...