Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 57
Driver and Passenger Temperature Up and
Down Buttons
These buttons provide the driver
and passenger with independent
temperature control.
Push the red button on the faceplate
or touchscreen or press and slide the
temperature bar towards the red
arrow button on the touchscreen for
warmer temperature settings.
Push the blue button on the faceplate
or touchscreen or press and slide the
temperature bar towards the blue
arrow button on the touchscreen for
cooler temperature settings.
NOTE:
The numbers within the temperature display will
only appear if the system is equipped with an
automatic climate control system.
SYNC Button
Press the SYNC button on the
touchscreen to toggle the SYNC
feature on/off. The SYNC indicator
illuminates when SYNC is on. SYNC
synchronizes the passenger temperature
setting with the driver temperature setting.
Changing the passenger’s temperature setting
while in SYNC will automatically exit this
feature.
NOTE:
The SYNC button is only available on the touch-
screen.
Blower Control
Blower Control regulates the amount of
air forced through the climate control
system. There are seven blower
speeds available. Adjusting the blower
will cause automatic mode to switch to manual
operation. The speeds can be selected using
either the blower control knob on the faceplate or
the buttons on the touchscreen.
Faceplate
The blower speed increases as you turn the
blower control knob clockwise from the lowest
blower setting. The blower speed decreases
as you turn the blower control knob
counterclockwise.
Touchscreen
Use the small blower icon to reduce the blower
setting and the large blower icon to increase the
blower setting. Blower can also be selected by
pressing the blower bar area between the icons.
Mode Control
Select Mode by pressing one of the
Mode buttons on the touchscreen to
change the airflow distribution mode.
The airflow distribution mode can be
adjusted so air comes from the instrument
panel outlets, floor outlets, defrost outlets, and
demist outlets.
Panel Mode
Selecting this mode from the
touchscreen causes air to flow from
the outlets in the instrument panel.
Each of these outlets can be
individually adjusted to direct the flow of air.
The air vanes of the center outlets and outboard
outlets can be moved up and down or side to
side to regulate airflow direction. There is a shut
off wheel located below the air vanes to shut off
or adjust the amount of airflow from these
outlets.
2
21_KL_OM_EN_USC_t.book Page 57
Loading ...
Loading ...
Loading ...