Loading ...
Loading ...
Loading ...
346 IN CASE OF EMERGENCY
Using The Mode Select Knob And Hoses
Your Tire Service Kit is equipped with the
following symbols to indicate the air or sealant
mode.
Selecting Air Mode
Push in the Mode Select Knob and
turn to this position for air pump
operation only. Use the Black Air Pump Hose
when selecting this mode.
Selecting Sealant Mode
Push in the Mode Select Knob and
turn to this position to inject the
Tire Service Kit Sealant and to inflate the tire.
Use the Sealant Hose (clear hose) when
selecting this mode.
Using The Power Button
Push and release the Power Button
once to turn on the Tire Service Kit.
Push and release the Power Button again to
turn Off the Tire Service Kit.
Using The Deflation Button
Push the Deflation Button to
reduce the air pressure in the tire if
it becomes overinflated.
TIRE SERVICE KIT USAGE PRECAUTIONS
Replace the Tire Service Kit Sealant Bottle
and Sealant Hose prior to the expiration date
(printed at the upper right hand corner or
the lower right corner on the bottle label,
depending on the vehicles trim level) to
assure optimum operation of the system
Ú page 351.
Tire Service Kit Sealant Expiration Date Location
Tire Service Kit Sealant Expiration Date Location
The Sealant Bottle and Sealant Hose are a
one tire application use and need to be
replaced after each use. Always replace
these components immediately at your orig-
inal equipment vehicle dealer.
When the Tire Service Kit sealant is in a liquid
form, clean water and a damp cloth will
remove the material from the vehicle or tire
and wheel components. Once the sealant
dries, it can easily be peeled off and properly
discarded.
For optimum performance, make sure the
valve stem on the wheel is free of debris
before connecting the Tire Service Kit.
21_KL_OM_EN_USC_t.book Page 346
Loading ...
Loading ...
Loading ...