Loading ...
Loading ...
Loading ...
SERVICING AND MAINTENANCE 377
3. Pull down the passenger hush panel under
the dash panel.
Hush Panel
4. Remove the filter door by pushing down the
tab on the top of the door to release the
cover then rotate the door out and lift up.
Air Filter Cover Location
5. Remove the A/C air filter by pulling it
straight out of the housing. Take note of the
air filter position indicators.
A/C Air Filter
6. Install the A/C air filter with the air filter
position indicators pointing in the same
direction as removal.
7. Install the passenger side hush panel under
the dash panel and console closeout.
Refer to the Maintenance Plan in this chapter
for the proper maintenance intervals
Ú page 364.
BODY LUBRICATION
Locks and all body pivot points, including such
items as seat tracks, door hinge pivot points
and rollers, liftgate, tailgate, decklid, sliding
doors and hood hinges, should be lubricated
periodically with a lithium based grease, such
as Mopar Spray White Lube to ensure quiet,
easy operation and to protect against rust and
wear. Prior to the application of any lubricant,
the parts concerned should be wiped clean to
remove dust and grit; after lubricating, excess
oil and grease should be removed. Particular
attention should also be given to hood latching
components to ensure proper function. When
performing other underhood services, the hood
latch, release mechanism and safety catch
should be cleaned and lubricated.
The external lock cylinders should be lubricated
twice a year, preferably in the Fall and Spring.
Apply a small amount of a high quality lubricant,
such as Mopar Lock Cylinder Lubricant directly
into the lock cylinder.
CAUTION!
The A/C air filter is identified with an arrow to
indicate airflow direction through the filter.
Failure to properly install the filter will result
in the need to replace it more often.
8
21_KL_OM_EN_USC_t.book Page 377
Loading ...
Loading ...
Loading ...