Loading ...
Loading ...
Loading ...
362 IN CASE OF EMERGENCY
REPLACING EXTERIOR BULBS
Back-up Lamp
See below steps to replace:
1. Open the liftgate.
2. Use a fiber stick or flat blade screw driver at
the top of the bulb access cover to pry the
lower trim panel from the liftgate.
3. Once the access panel is loose, pull it back
exposing the insulation.
4. Move insulation towards center of vehicle to
expose the back of liftgate lamp.
5. Twist the socket counterclockwise and
remove from lamp.
6. Pull the bulb to remove it from the socket.
7. Replace the bulb, reinstall the socket.
8. Move insulation back to original position.
9. Close the liftgate.
Rear Turn Signal Lamps LED (Serviced at an Authorized Dealer)
Center High Mounted Stop Lamp (CHMSL) LED (Serviced at an Authorized Dealer)
Back-Up Lamps W21W
License Plate Lamp LED (Serviced at an Authorized Dealer)
Exterior Bulbs
Bulb Name Bulb Number
21_KL_OM_EN_USC_t.book Page 362
Loading ...
Loading ...
Loading ...