Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 69
NOTE:
The lower position is not available in vehicles
equipped with either a compact spare tire, or a
full size spare tire. The center position is not
available in vehicles equipped with a full size
spare tire.
To change the level of the load floor, pull
upward on the load floor handle, pull the floor
outward, and place the back of the floor into the
desired position. Lower the front of the floor into
place.
Cargo Load Floor Positions
Raising The Load Floor
To raise the load floor for access of the Tire
Service Kit, or spare tire (if equipped), pull
upward on the load floor handle.
Do not raise the floor beyond the point of
resistance. In vehicles equipped with a power
liftgate, forcing the floor upward can damage
the floor and vehicle’s trim panel.
Raised Load Floor — (Power Liftgate)
To fully raise the load floor, pull upward on the
floor handle, pull the floor outward, then
position the floor upright with the bottom fitting
on top of the floor positioning brackets. Push
the top of the floor down firmly to secure it in
this position.
Fully Raised Load Floor Position
To provide additional storage area, each rear
seat can be folded flat. This allows for extended
cargo space and still maintains some rear
seating room. Refer to “Seats” in this chapter
for further information.
Cargo Tie-Down Hooks And Loops
The tie-downs located on the cargo area floor
should be used to secure loads safely when the
vehicle is moving.
Cargo tie-down loops are located on the trim
panels.
1 — Upper Position
2 — Center Position
3 — Lower Position
1 — Raised Floor Maximum Height
2 — Raised Load Floor
2
20_MP_OM_EN_USC_t.book Page 69
Loading ...
Loading ...
Loading ...