Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 213
NOTE:
If snow, ice, mud, or any foreign substance
builds up on the camera lens, clean the lens,
rinse with water, and dry with a soft cloth. Do
not cover the lens.
REFUELING THE VEHICLE
The Capless Fuel System uses a flapper placed
at the filler pipe of the fuel tank; it opens and
closes automatically upon insertion/extraction
of the fuel nozzle. The Capless Fuel System is
designed so that it prevents the filling of an
incorrect type of fuel.
1. Open the fuel filler door by pushing on the
outer edge of the fuel door.
Fuel Filler Door
Fuel Filler Pipe
2. There is no fuel filler cap. A flapper door
inside the pipe seals the system.
3. Insert the fuel nozzle fully into the filler pipe;
the nozzle opens and holds the flapper door
while refueling.
4. Fill the vehicle with fuel, and when the fuel
nozzle “clicks” or shuts off, the fuel tank is
full.
5. Wait 10 seconds before removing the fuel
nozzle to allow fuel to drain from nozzle.
6. Remove the fuel nozzle and close the fuel
door.
WARNING!
Drivers must be careful when backing up
even when using the ParkView Rear Back Up
Camera. Always check carefully behind your
vehicle, and be sure to check for
pedestrians, animals, other vehicles,
obstructions, or blind spots before backing
up. You are responsible for the safety of your
surroundings and must continue to pay
attention while backing up. Failure to do so
can result in serious injury or death.
CAUTION!
To avoid vehicle damage, ParkView should
only be used as a parking aid. The ParkView
camera is unable to view every obstacle or
object in your drive path.
To avoid vehicle damage, the vehicle must
be driven slowly when using ParkView to be
able to stop in time when an obstacle is
seen. It is recommended that the driver
look frequently over his/her shoulder when
using ParkView.
5
20_MP_OM_EN_USC_t.book Page 213
Loading ...
Loading ...
Loading ...