Loading ...
Loading ...
Loading ...
SafeStream Gigabit Broadband VPN Router User GuideTL-R600VPN
47
IPsec tunnel is successfully established. The ingoing SPI value and outgoing SPI value are dif-
ferent. However, the Incoming SPI value must match the Outgoing SPI value at the other end of
the tunnel, and vice versa. The connection status on the remote endpoint of this tunnel is as the
following figure shows. The SPI value is obtained via auto-negotiation.
4.9 PPTP VPN Server
Choose menu PPTP VPN Server, the next submenus are shown below.
Figure 4-43
Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
4.9.1 Server Settings
Choose menu PPTP VPN Server→Server Settings, you can configure the parameters of the
PPTP Server in the next screen (shown in Figure 4-44).
Figure 4-44
¾ PPTP Server – Enable or disable the PPTP Server.
¾ MPPE Encryption – Enable or disable the MPPE Encryption. If enabled, the PPTP tunnel
will be encrypted by MPPE.
¾ IP Range Start - Enter the start IP address to define a range for the server's IP assignment.
¾ IP Range End - Enter the end IP address to define a range for the server's IP assignment.
4.9.2 Account Settings
Choose the menu PPTP VPN Server→Account Settings, you can configure the PPTP account
in the next screen (shown in Figure 4-45).
Loading ...
Loading ...
Loading ...