Loading ...
Loading ...
Loading ...
SafeStream Gigabit Broadband VPN Router User GuideTL-R600VPN
43
Other configurations for the entries as shown in Figure 4-38:
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous screen, click the Next button to
view the information in the next screen.
4.8.2 IPsec
Choose menu IPsec VPN→IPsec, you can configure the related parameters for IPsec negotiation
and view the IPsec policy in the next screen (shown in Figure 4-40).
Figure 4-40
¾ IPSec: Enable or disable IPsec and click save to apply.
¾ Policy Name: The unique name to the IPsec policy for identification and management
purposes.
¾ Local Subnet: The IP address range on your local LAN to identify which PCs on your LAN
are covered by this policy. It's formed by IP address and subnet mask.
¾ Remote Subnet: The IP address range on your remote network to identify which PCs on the
remote network are covered by this policy. It's formed by IP address and subnet mask.
¾ Exchange Mode: The negotiation mode for the policy.
)
Note:
When deleting, modifying or adding the IKE/IPsec entries, all the existing VPN tunnels will be
disconnected for a few seconds and then reconnected. Operation to the IKE entries not
associated with the IPsec will not affect the VPN tunnel.
To add/modify an IPsec entry:
Step 1: Click Add New…/Modify shown in Figure 4-40, you will see a new screen shown in
Figure 4-41.
Step 2: Enter the Policy Name, Local Subnet, Remote Subnet, Remote Gateway, PFS Lifetime
and then select the Exchange Mode, Security Protocol, Authentication Algorithm,
Encryption Algorithm, IKE Security Policy, PFS Group. Then enable or disable the
settings.
Loading ...
Loading ...
Loading ...