Loading ...
Loading ...
Loading ...
86
Changing the settings
86
Setting items of [Mixer] tab in [Controller]
Mixer Mode setting
Changes the mixer mode setting.
= Switching the mixer mode (p. 57 )
Fader Start setting
Changes the fader start function setting.
! By default, this is enabled.
When the [Activate the fader start when moving a channel fader
or the cross fader while pressing the SHIFT button.] check box is
selected, the function is enabled.
Cross Fader Curve setting
Switches the characteristics of the crossfader curve.
! The further the control is turned clockwise, the sharper the curve
rises.
! The further the control is turned counterclockwise, the more
gradually the curve rises.
Cross Fader Cut Lag setting
Adjust the length of the silent zone (cut lag) of both ends of the
crossfader.
Adjustment can be made from 0.5 mm to 5.7 mm in 0.1 mm
increments.
! By default, the level is set to 1.0 mm.
Output setting of the microphone to the booth monitor
Changes whether or not the microphone sound is output from the
booth channel.
When the [Don’t output microphone sound to the Booth output.]
check box is unselected, the microphone sound is output from the
booth channel. When the check box is selected, the microphone
sound is not output from the booth channel.
Loading ...
Loading ...
Loading ...