Loading ...
Loading ...
Loading ...
M710 User Manual 68
Label Types
110-Block, Bix Block
11. If serialization was not used, the editor opens on label 1. Enter data for each label. For help
navigating labels see “Go to Label or Area” on page 44.
Note: Labels can be added or deleted, if serialization was not used. See “Add Label or Area” on
page 43 or “Delete Label or Area” on page 45.
12. Press PREVIEW to view the labels before printing.
110-Block, Bix Block
110-Block and Bix Block use continuous label supplies with widths of 0.625 or 0.475 inches (15.9 or
12.1 mm).
The 110-Block label type is based on user-selected pair configurations, with the length of the label
determined by the pair type selected. The label height uses a dedicated 110-Block label height of
0.475 inch (12.1 mm). The length of a 110-Block label is 7.5 inches (190.5 mm), with a total strip length
of 7.9 inches (200.7 mm). The number and formatting of areas is based on pair configuration and
serialization selected.
Bix Block template information is similar to the 110-block, with some variations on height and length of
strip. The label height uses a dedicated Bix Block part height of 0.625 inch (15.9 mm). The length of a
Bix Block label is 6.2 inches (157.5 mm) with a total strip length of 6.6 inches (167.6 mm).
To create 110- or Bix block labels:
1. Press LABEL TYPE.
2. Select 110-Block or Bix Block. The printer displays the settings screen for 110-block or Bix
block labels.
3. In the Block Type field, from the drop down list, select the pair configuration to use.
In the 110- and Bix Block applications, the number of areas created is based on the pair
configuration selected. Vertical and horizontal separator lines are automatically added.
Loading ...
Loading ...
Loading ...