Loading ...
Loading ...
Loading ...
M710 User Manual 11
Setup
Printer Settings
Label Type
Set defaults for new labels and for pipe marker label types.
To set pipe marker defaults:
1. Press FN + SETUP.
2. Use the navigation keys to move through the menu until Label Type is highlighted.
3. Press to accept the choice and display the application settings.
4. Configure the following settings. For information on how to use the screen, see “Settings
Screens” on page 28.
•
On New Label Creation:
When you start a new label, you usually have to specify some
settings. Some label types show a setting screen with several selections, others just have a
menu to select one option. These settings are detailed in
Chapter 5: Label Types
.
Your choice for On New Label Creation determines the default values for these label type
settings.
•
Clear previous field values:
Uses the factory default settings regardless of your previous
choices.
•
Default to previous field values:
Uses your previous settings as the default.
•
Color Standards:
Select the standard used in your country. When creating a pipe marker from
the EU Safety menu, this setting determines the colors needed. Once you select the pipe
contents, the pipe marker settings screen will show you the label and ribbon colors that you will
need to print the pipe marker.
• Default PipeMarker Symbol Category: When adding graphics to a pipe marker you have
to choose a category of symbols to select from. Setting this is a convenient way to have the
symbols most often used when creating pipe markers readily available. You can still select
a different category while creating a pipe marker. This option is only available when Clear
previous field values is set under On New Label Creation (see above).
•
Adjust PipeMarker Length to Characters:
The length of pipemarker labels is set to conform
to standards. This check box controls whether the length of the label will shorten if there is not
much text on the label.
Select the check box if you want the label to shorten when there is little text. This saves
label material. Clear the check box if you want the full size pipemarker regardless of the
amount of text.
In both cases the software gives you the option of increasing the label length to
accommodate text that is too long to fit on the standard label length.
Font
Choose the font to use when creating labels on the printer. Only one font type can be selected per
label file. These settings do not affect any currently open label file. They take effect for the next new
label file created.
To set the font:
1. Press FN + SETUP.
Loading ...
Loading ...
Loading ...