Loading ...
Loading ...
Loading ...
M710 User Manual 21
Setup
Loading Supplies
7. Continue to feed the leading edge of the label roll under the core. Insert the loose label end up
to the black line under the ribs, making sure that the label material covers the sensors and that
the edge of the label supply roughly aligns with the side of the label well. See Figure 2-1 and
Figure 2-2 on page 18.
8. Turn the printer on and press FEED to feed the label supply through the printer.
9. Close the cover.
IMPORTANT! Be sure to store the core with any remaining unused labels when you are done
printing. The printer uses the smart cell on the core to track how many labels are
remaining. Always use the core that came with the labels otherwise the printer may
present an out of labels error message.
Loading Fanfold (Raised Panel) Labels
3. Open the printer and insert the label core making sure the smart cell on the label roll aligns
with the reader in the label well.
6. Pull the loose end of the bulk label
supply out of the box punch-out and
thread over the tray and into the bulk
label feed path on the printer.
1. Remove the label core and the ramp
from the box, then close the box.
2. On the side of the box, press in the tab
and remove the perforated flap.
Loading ...
Loading ...
Loading ...