Loading ...
Loading ...
Loading ...
M710 User Manual 44
Editing Labels on the Printer
Labels and Areas
To change the length of the label:
1. Press the LABEL key.
2. Select Length, then Fixed. Length is not available if you are using a pre-sized label supply.
3. Enter the desired length of the label into the field.
4. Press .
Note: The minimum and maximum values for the label supply installed are shown to the left and
right of the type-in field.
Go to Label or Area
To move to another label:
1. Press the LABEL key.
2. Select Go to, then enter the number of the label desired.
3. Press .
To move to another area on a label with multiple areas:
Note: Areas can only be used on continuous label supply.
1. Press FN and AREA keys.
2. Select Go to, then enter the number of the area desired.
3. Press .
Shortcut Keys
• Press
NEXT LABEL
to go to the next label in the file.
• Press
FN
and
PREV LABEL to go to the previous label in the file
.
• Press
NEXT AREA to move to the next area within a label with multiple areas configured
.
• Press
FN
and
PREV AREA to move to the previous area within a label with multiple areas
configured
.
• Use the
FN
key plus navigation keys. See
“Move to an area” on page 30
and
“Move to a label” on
page 31
.
Shortcuts on the Touchscreen
Scroll through labels or areas by tapping the upper right corner to access the scroll arrows on the
screen.
• Use the up and down arrows to access the next or previous label in the sequence.
• Use the right and left arrows to access the next area in the sequence.
Loading ...
Loading ...
Loading ...