Loading ...
Loading ...
Loading ...
6). Power Off
After completing the flight, please turn off the power of the aircraft and the remote
control in sequence.
5).
Operate the Aircraft Landing
Choose any of the following methods to control the aircraft to land:
• During RTH process, when the aircraft is flying above 30 meters, the aircraft will
immediately perform the RTH function; when flying below 30 meters, the aircraft will rise
to 30 meters automatically and then perform the RTH function.
• When the GPS signal is poor or the GPS does not work, it is not possible to return.
• If the the aircraft fails to locate by GPS, and the remote-control signal continues to be
interrupted for more than 2 seconds, the aircraft will not be able to return. At this time,
the aircraft will slowly descend until it lands and the propellers stop.
• The return altitude is set to 30m by default, and the flight limit altitude is set to 120m
by default. Users can set appropriate parameters on the
“Aircraft Settings” page of the
app according to their needs.
a. Manually operate the remote control to land: Slowly pull down the throttle stick,
and the aircraft will land slowly. When the aircraft land, continue to keep the throttle
stick at the lowest position until the propeller stops rotating.
c. Automatic landing after automatic return or low power return and other intelligent
return.
Note: During landing, please keep a safe distance from the aircraft.
b. One key land: Press and hold the one-key takeoff and landing button on the remote
control for 2-3 seconds, the remote control will make a beeping sound and the aircraft will
land vertically from the current position until the propeller stops rotating. You can also
select the icon from the app interface and a confirmation dialog box will pop-up. After
clicking “OK”, the aircraft will land vertically from the current position until the propeller
stops rotating.
Slowly pull down the throttle stick
Long press 2-3seconds
Click this icon
21
Loading ...
Loading ...
Loading ...