Hikvision DS-K1T672M User Manual

Loading ...

9.5.21 Device Debugging

You can set device debugging parameters.

Steps

Click Maintenance and Security → Maintenance → Device Debugging .

You can set the following parameters.

Enable SSH

To raise network security, disable SSH service. The conguraon is only used to debug the

device for the professionals.

Print Log

You can click Export to export log.

Capture Network Packet

You can set the Capture Packet Duraon, Capture Packet Size, and click Start to capture.

9.5.22 Log Query

You can search and view the device logs.

Go to Maintenance and Security → Maintenance → Log .

Set the major and minor type of the log type. Set the start me and end me for searching, and

click Search.

The results will be displayed below, which including the No., me, the major type the minor type,

the channel No., the local/remote user informaon, the remote host IP, etc.

9.5.23 Security Mode Sengs

Set the security mode for logging in the client soware.

On the Device for Management page, click Maintenance and Security → Security → Security

Service .

Select a security mode, and click Save.

Security Mode

High security level for user informaon vericaon when logging in the client soware.

Compable Mode

The user informaon vericaon is compable with the old client soware version when

logging in.

Face Recognion Terminal User Manual

114

Loading ...

Hikvision DS-K1T672M Ultra Series Wall-Mounted Face Access Terminal