Hikvision DS-K1T672M User Manual

Loading ...

Click Conguraon → Event → Alarm Sengs .

Create a name for the wired alarm output device and set the output delay me. Click Save.

Note

The output delay should be within 0 and 5999.

9.5.11 Access Control Sengs

Set Authencaon Parameters

Click Conguraon → Access Control → Authencaon Sengs .

Note

The funcons vary according to dierent models. Refers to the actual device for details.

Click Save to save the sengs aer the conguraon.

If select Terminal 1:

Terminal Type/Terminal Model

Select terminal and get the terminal descripon. They are read-only.

Enable Authencaon Device

Enable the authencaon funcon.

Authencaon

Select an authencaon mode according to your actual needs from the drop-down list.

Recognion Interval

You can set the interval between 2 connuous recognion of a same person during the

authencaon. In the congured interval, Person A can only recognized once. If another person

(Person B) has recognized during the interval, Person A can recognized again.

Authencaon Interval

You can set the authencaon interval of the same person when authencang. The same

person can only authencate once in the congured interval. A second authencaon will be

failed.

Alarm of Max. Failed Aempts

Enable to report alarm when the card reading aempts reach the set value.

Tampering Detecon

Enable the an-tamper detecon for the card reader.

Card No. Reversing

The read card No. will be in reverse sequence aer enabling the funcon.

If select Terminal 2:

Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T672M Ultra Series Wall-Mounted Face Access Terminal