Hikvision DS-K1T672M User Manual

Loading ...

9.5.13 Set Card Security

Click Conguraon → Card Sengs → Card Type to enter the sengs page.

Set the parameters and click Save.

Enable NFC Card

In order to prevent the mobile phone from geng the data of the access control, you can

enable NFC card to increase the security level of the data.

Enable M1 Card

Enable M1 card and authencang by presenng M1 card is available.

M1 Card Encrypon

Sector

M1 card encrypon can improve the security level of authencaon.

Enable the funcon and set the encrypon sector. By default, Sector 13 is encrypted. It is

recommended to encrypt sector 13.

Enable EM Card

Enable EM card and authencang by presenng EM card is available.

Enable DESFire Card

The device can read the data from DESFire card when enabling the DESFire card funcon.

Enable FeliCa Card

The device can read the data from FeliCa card when enabling the FeliCa card funcon.

9.5.14 Set Card No. Authencaon Parameters

Set the card reading content when authencate via card on the device.

Go to Conguraon → Card Sengs → Card No. Authencaon Sengs .

Select a card authencaon mode and click Save.

Full Card No.

All card No. will be read.

Wiegand 26 (3 bytes)

The device will read card via Wiegand 26 protocol (read 3 bytes).

Wiegand 34 (4 bytes)

The device will read card via Wiegand 34 protocol (read 4 bytes).

9.5.15 Time and Aendance Sengs

If you want to track and monitor when the persons start/stop work and monitor their working

hours and late arrivals, early departures, me taken on breaks, and absenteeism, you can add the

Face Recognion Terminal User Manual

103

Loading ...

Hikvision DS-K1T672M Ultra Series Wall-Mounted Face Access Terminal