Hikvision DS-K1T672M User Manual

Loading ...

Terminal Type/Terminal Model

Select terminal and get the terminal descripon. They are read-only.

Enable Authencaon Device

Enable the authencaon funcon.

Authencaon

Select an authencaon mode according to your actual needs from the drop-down list.

Recognion Interval

You can set the interval between 2 connuous recognion of a same person during the

authencaon. In the congured interval, Person A can only recognized once. If another person

(Person B) has recognized during the interval, Person A can recognized again.

Alarm of Max. Failed Aempts

Enable to report alarm when the card reading aempts reach the set value.

Communicaon with Controller Every

When the access control device cannot connect with the card reader for longer than the set

me, the card reader will turn oine automacally.

Max. Interval When Entering Password

When you entering the password on the card reader, if the interval between pressing two digits

is longer than the set value, the digits you pressed before will be cleared automacally.

OK LED Polarity/Error LED Polarity

Set OK LED Polarity/Error LED Polarity of the access control device according to the card reader

parameters. Generally, adopts the default sengs.

Tampering Detecon

Enable the an-tamper detecon for the card reader.

Set Door Parameters

Click Conguraon → Access Control → Door Parameters .

Click Save to save the sengs aer the conguraon.

Door Name

You can create a name for the door.

Open Duraon

Set the door unlocking duraon. If the door is not opened for the set me, the door will be

locked.

Door Open Timeout Alarm

An alarm will be triggered if the door has not been closed within the congured me duraon.

Door Magnec Sensor Type

Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T672M Ultra Series Wall-Mounted Face Access Terminal