Hikvision DS-K3B411BX User Manual

Loading ...

Add Devices by IP Segment

If the devices share the same port No., user name and password, and their IP addresses are

sharing an IP segment. You can specify the start IP address and the end IP address, port No., user

name, password, etc of the devices to add them to the client.

Steps

Enter the Device Management module.

Click Device tab on the top of the right panel.

The added devices are displayed on the right panel.

Click Add to open the Add window.

Select IP Segment as the adding mode.

Enter the required

informaon.

Start IP

Enter a start IP address.

End IP

Enter an end IP address in the same network segment with the start IP.

Port

Enter the device port No. The default value is 8000.

User Name

By default, the user name is admin.

Password

Enter the device password.

Cauon

The password strength of the device can be automacally checked. We highly recommend

you change the password of your own choosing (using a minimum of 8 characters, including

at least three kinds of following categories: upper case leers, lower case leers, numbers,

and special characters) in order to increase the security of your product. And we recommend

you change your password regularly, especially in the high security system, changing the

password monthly or weekly can

beer protect your product.

Proper conguraon of all passwords and other security sengs is the responsibility of the

installer and/or end-user.

Oponal: Add the oine devices.

1) Check Add Oine Device.

2) Enter the required informaon, including the device channel number and alarm input

number.

Note

When the oine device comes online, the soware will connect it automacally.

DS-K3B411B(L)X Series Swing Barrier User Manual

Loading ...

Hikvision DS-K3B411BX Value Swing Barriers