Hikvision DS-K3B411BX User Manual

Loading ...

Temperature Unit

Select the temperature unit that displayed in the device status.

Click OK.

8.7.2 Congure Device Parameters

Aer adding the access control device, you can set its parameters such as network parameters.

Set RS-485 Parameters

You can set the access control device's RS-485 parameters including the baud rate, data bit, the

stop bit, parity type, ow control type, communicaon mode, work mode, and connecon mode.

Steps

Note

The RS-485 Sengs should be supported by the device.

Enter the Access Control module.

On the navigaon bar on the le, enter Advanced Funcon → More Parameters .

Select an access control device in the device list and click RS-485 to enter the RS-485

Sengs

page.

Select the serial port number from the drop-down list to set the RS-485 parameters.

Set the serial number, external device,

authencaon center, baud rate, data bit, stop bit, parity

type,

ow control type, communicaon mode, and working mode in the drop-down list.

Click Save.

●

The

congured parameters will be applied to the device automacally.

●

When you change the working mode or connecon mode, the device will reboot

automacally.

Enable M1 Card

Encrypon

M1 card encrypon can improve the security level of authencaon.

Steps

Note

The funcon should be supported by the access control device and the card reader.

Enter the Access Control module.

On the

navigaon bar on the le, enter Advanced Funcon → More Parameters .

Select an access control device in the device list and click M1 Card Encrypon Vericaon to

enter the M1 Card Encrypon Vericaon page.

DS-K3B411B(L)X Series Swing Barrier User Manual

Loading ...

Hikvision DS-K3B411BX Value Swing Barriers