Loading ...
Loading ...
Loading ...
2.
Select Entrance or Exit.
3.
Enable Wiegand funcon.
4.
The wiegand transmission direcon is set Input by default.
Note
Input: the device can connect a Wiegand card reader.
5.
Click Save to save the
sengs.
Note
If you change the peripheral, and aer you save the device parameters, the device will reboot
automacally.
Set Terminal Parameters
Set the working mode and remote vericaon.
Steps
1.
Click Conguraon → Access Control → Terminal Parameters to enter the page.
Figure 7-11 Terminal Parameters
2.
Set the device working mode.
Permission Free Mode
The device will not verify the person's permission, but only the person's validity period. If the
person is in the validity period, the barrier will open.
You can enable Verify
Credenal Locally. Aer enabling the funcon, the device will only
verify the person's permission without the schedule template, etc.
Access Control Mode
The device works normally and will verify the person's permission to open the barrier.
3.
Set remote
vericaon.
1) Enable Remote Vericaon.
DS-K3B411B(L)X Series Swing Barrier User Manual
53
Loading ...
Loading ...
Loading ...