Loading ...
Loading ...
Loading ...
Steps
Note
●
The device should be installed on the concrete surface or other non-ammable surfaces.
●
In order to prevent stainless steel from rusng due to dirt during the construcon process, it is
recommended to tear o the protecve lm aer the device is installed. There may be residual
glue at the
lm cung posion, and it is recommended to wipe the lm with WD-40 protecve
liquid aer tearing the lm.
●
No face recognion terminal installed: If the installaon area is too close to the wall, make sure
the distance between the pedestal and the wall should be more than 20 mm, or the surface may
be scratched.
Figure 3-2 Installaon Distance (Without Face Recognion Terminal)
●
Face recognion terminal installed: If the installaon area is too close to the wall, make sure the
distance between the pedestal and the wall should be more than 60 mm, or the surface may be
scratched.
DS-K3B411B(L)X Series Swing Barrier User Manual
6
Loading ...
Loading ...
Loading ...