Loading ...
Loading ...
Loading ...
Figure 5-7 Enable Keyfob Paring Mode
3.
Power on the turnsle and it will enter the keyfob pairing mode.
4.
Hold the Close
buon for more than 10 seconds.
The keyfob's indicator of the will ash twice if the pairing is completed.
5.
Set the No.2 switch to the OFF side, and reboot the turnsle to take eect.
Note
●
Only one turnsle can pair the keyfob. If mulple turnsles are in the pairing mode, the
keyfob will select only one of them to pair.
●
For details about DIP switch value and meaning, see DIP Switch Descripon .
6.
Oponal: Go to System → User → Keyfob User on the remote control page of the client
soware to delete the keyfob.
5.4
Inialize Device
Steps
1.
Hold the inializaon buon on the access control board for 5 s.
Figure 5-8 Inializaon Buon Posion
2.
The device will start restoring to factory sengs.
3.
When the process is nished, the device will beep for 3 s.
Cauon
The inializaon of the device will restore all the parameters to the default seng and all the
device events are deleted.
DS-K3B411B(L)X Series Swing Barrier User Manual
33
Loading ...
Loading ...
Loading ...