FLUKE 6109A-P-156 User Manual for the Fluke 6109A-P-156 Portable Calibration Bath with Process Electronics, 35°C to 250°C

Loading ...

Portable Calibration Baths

Commands

SENSe2:DATA?

(-P models only) Return the DUT input measurement as resistance in ohms,

voltage in mV, or current in mA.

SENSe2:FUNction <function>

SENSe2:FUNction?

(-P models only) Select the function for the Input Module DUT inputs.

<function> is either RTD, TC, MA, or NONE.

This command is conditionally password protected.

SOURce:CUTout:CLEAr

Clear cutout condition.

For the cutout to be cleared, the fluid temperature must be less than the cutout

temperature setting.

SOURce:CUTout:EVENt?

Return the most recent cutout event.

The response is a sum of one or more codes. Codes are interpreted as in

Table 8:

Table 8. Cutout Codes

Code Definitions

0 No cutout occurred

1 Fluid temperature exceeded the cutout temperature

2 Tank is empty

16 Heater temperature exceeded the cutout temperature

32 Stir motor failed

SOURce:CUTout:LEVel <numeric_value>

SOURce:CUTout:LEVel?

Set the cutout temperature.

<numeric_value> is the temperature in °C or °F and depends on the temperature

unit setting.

This command is conditionally password protected.

SOURce:CUTout:STATe?

Return the cutout condition.

The response is 1 if the cutout is active, or 0 otherwise.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 6109A-P-156 Portable Calibration Bath with Process Electronics, 35°C to 250°C