FLUKE 6109A-P-156 User Manual for the Fluke 6109A-P-156 Portable Calibration Bath with Process Electronics, 35°C to 250°C

Loading ...

Portable Calibration Baths

Menu Guide

(Program > Select)  Stop Program

Stop the program.

This function only appears if a program is running.

Once stopped, a program cannot be continued.

(Program > Select)  Edit

Change the selected program.

A list of program parameters shows:

• Program Name identifies which program is selected or running.

• Setpoints indicate the number of setpoints that have been defined. It

cannot be changed directly. Use Edit Setpoint to add, delete, or

change setpoints.

• Cycles defines the number of cycles completed before the program is

finished.

• Order controls the order of setpoints. If Order is Linear, the program

setpoints step from first to last in one cycle. The next cycle starts with

the first setpoint again. If Order is Up/Down, the sequence is from first

to last, then backwards last to first to complete one cycle.

• Dwell Time is number of minutes the temperature is held at each

setpoint before it advances to the next setpoint. The timer begins

when the control indicator changes to Stable and the ready indicator

is green.

• Ramp Rate overrides the Setpoint mode Ramp Rate as a program

runs.

• Ramp Enable overrides the Setpoint mode Ramp Enable as a

program runs.

Push  (Save) to save the program.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 6109A-P-156 Portable Calibration Bath with Process Electronics, 35°C to 250°C