FLUKE 6109A-P-156 User Manual for the Fluke 6109A-P-156 Portable Calibration Bath with Process Electronics, 35°C to 250°C

Loading ...

Portable Calibration Baths

Operation

Preset Setpoints

Use presets to set the setpoint to frequently-used temperatures. To define

presets:

1. Push .

2. Push  (Presets) to see the list of preset setpoints.

3. Push  as needed to choose one of the numbered setpoints.

4. Push  (Edit) to edit the setpoint.

5. Use the number keys to type temperature.

6. Push  to save the new value.

7. Push  (Done) after all presets have been defined.

To recall a preset:

1. Push .

2. Push  (Presets) to see the list of preset setpoints,

3. Push  as needed to choose one of the numbered setpoints.

4. Push  to activate the chosen preset. The Setpoint field on the display

shows that the setpoint has changed to match the selected preset.

Set the Cutout

The cutout is a safety device that prevents overheating of the Product and bath

fluid in the event of operator error or product malfunction. For each test, set the

cutout to 5 °C to 15 °C above the maximum temperature at which the Product will

operate. Do not set the cutout higher than the maximum safe temperature of the

fluid.

1. Push .

2. Push  (Operation).

3. Push  to edit the Cutout Temperature.

4. Use the number keys to type in a temperature.

5. Push  to save the new temperature.

Stop Heating or Cooling

Push  to turn off heating and cooling and the stir motor.

Select the Temperature Unit

To change the temperature to degrees Fahrenheit or degrees Celsius:

1. Push .

2. Push  (Operation).

3. Push  (°C or °F).

4. Push  to see temperatures in the selected unit of measurement.

Note

In some regions, the Product may not have this option.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 6109A-P-156 Portable Calibration Bath with Process Electronics, 35°C to 250°C