FLUKE 6109A-P-156 User Manual for the Fluke 6109A-P-156 Portable Calibration Bath with Process Electronics, 35°C to 250°C

Loading ...

6109A/7109A

Operators Manual

(Setpoint > Presets)  Edit

Change the temperature of the selected preset.

(Setpoint)  Ramp Rate

Set the rate at which the Product heats or cools.

• Ramp Rate is the rate of change when heating or cooling. The setting

is only effective when Ramp Enable is ON. The actual rate may be

limited by the Product’s heating and cooling capacity.

• Ramp Enable enables or disables Ramp Rate. If Ramp Enable is

OFF, the Product heats or cools at the maximum possible rate.

(Setpoint)  Edit Setpoint

Change the setpoint.

This does the same as when you push .

Program

Use Program mode to create and run an automatic setpoint program.

When  is pushed, a list of defined programs is shown. Use  or  to select

a program.

(Program)  Select

Choose the program to run or edit.

 does the same.

When you push , a list of defined setpoints is shown.

The softkeys change with the state of the program execution.

(Program > Select)  Run Program

Start the selected program.

This function shows only if a program is not running.

(Program > Select)  Pause Program

Pause the program.

This function shows only if a program is running.

After the program is paused, it can be continued later.

(Program > Select)  Continue Program

Continue program execution.

This function only appears if a program is paused.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 6109A-P-156 Portable Calibration Bath with Process Electronics, 35°C to 250°C