Loading ...
Loading ...
Loading ...
Portable Calibration Baths
Product Overview
11
Back
The back of the Product is shown in Figure 4.
5
1
2
3
4
6
7
8
icu09.eps
Number Description
Fan Vents - As the Product cools, a heavy air stream flows from the fan vents. Keep at
least 300 mm of open space behind the Product to avoid an obstructed air flow. There
are also ventilation slots on the sides of the Product (not shown).
Mains Power Socket - A grounded male three-prong connector that accepts the mains
power cord. Connect the Mains power cord here.
Power Switch - Toggle this switch to I to turn on the Product. Toggle this switch to O to
turn off the Product.
Fuses - Protect the Product from excessive current. If a fuse appears to be blown,
contact Fluke Calibration for assistance. See Contact Fluke Calibration.
Overflow Tube - Directs excess bath fluid into the optional overflow container. If the
overflow kit is not used, keep the overflow tube plugged and reduce the fluid level to
allow for thermal expansion.
Overflow Container Mounting Bracket – Holds the optional overflow container (not
shown).
Drain Cover - Keep the drain plug (not shown) on tight and the drain cover in place for
normal operation.
Drain Tube - The drain tube (not visible) makes it easy to remove the bath fluid for
replacement or Product transport.
Figure 4. Back of the Product
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...