FLUKE 6109A-P-156 User Manual for the Fluke 6109A-P-156 Portable Calibration Bath with Process Electronics, 35°C to 250°C

Loading ...

Portable Calibration Baths

Installation

Provide Ventilation

Warning

To prevent personal injury:

• Read the bath fluid safety data sheet (SDS) and take

necessary precautions. Some fluids are corrosive, toxic, or

irritate the skin, eyes, nose, and respiratory organs.

• Use a ventilation system to remove vapor.

• Do not use fluids that are corrosive to stainless steel.

Harmful substances such as benzene and formaldehyde can be produced above

a certain temperature. The safety data sheet for a silicone fluid typically states

149 °C for this temperature.

Bath fluid vapors present a fire hazard, especially when the bath fluid is operated

above its flash point. Bath fluid vapors tend to condense onto surrounding

surfaces. This can contaminate materials and inhibit laboratory cleanliness. If

enough condensation accumulates on the floor, the floor becomes slippery and

creates a safety hazard.

For appropriate fume extraction use a ventilation duct of at least 75 mm

(3 inches) in diameter with an air flow rate between 1.4 cubic meters and

1.7 cubic meters per minute (50 cfm to 60 cfm). Place the inlet of the ventilation

duct near the top of the tank.

Add Bath Fluid

The choice of bath fluid is important for the Product to achieve full temperature

range and performance specifications. Table 2 lists the recommended bath fluid

for each model.

Table 2. Recommended Bath Fluids

7109A 6109A

Fluke 5012 Silicone, 10 centistoke Fluke 5014 Silicone, 50 centistoke

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 6109A-P-156 Portable Calibration Bath with Process Electronics, 35°C to 250°C