Loading ...
Loading ...
Loading ...
Optera™ Operations Manual
C2284M | 08/20
40
up 2 Camera Tracking for the Optera. Third, calibrate the position of the Enhanced Series PTZ camera
relative to the Optera.
After setup, Pelco Camera Link provides controls to verify that the cameras are aligned correctly and that
auto tracking is operating correctly. Before setting up Pelco Camera Link, install and turn on both the
Optera and Pelco Enhanced Series PTZ cameras using standard procedures. Verify that the cameras are
operating and that both can be access from a web interface. Note the IP addresses from the cameras that
are to be connected with Pelco Camera Link. Both Optera and the Pelco Enhanced Series PTZ camera
must have firmware version 2.11 or later.
Setting Up Pelco Camera Link
Step #1 (Enhanced Series PTZ Connection): First, establish a connection between the Optera and
Enhanced Series PTZ camera.
1. Open a web page and enter the IP address for the Enhanced Series PTZ camera.
2. Login and select Settings, PTZ, and Pelco Camera Link. Three red stop lights show the status. All
three lights turn green when the cameras are linked and ready to operate together.
Step #1 Continued (Optera Connection): Next, connect the Optera camera.
Loading ...
Loading ...
Loading ...