Loading ...
Loading ...
Loading ...
SIGLENT
SDS2000X User Manual 21
6. Trigger Position Label
Display the trigger position of the waveform on the screen.
7. Frequency Counter
Display the frequency of current waveform as trigger source.
8. Sampling Rate/ Memory Depth
Display the current sample rate and memory depth of the oscilloscope. Use the
Horizontal scale knob to modify the parameters.
9. Trigger Setup
Trigger Type : Displays the currently selected trigger type and trigger condition
setting. Different labels are displayed when different trigger types are selected.
Trigger source : Displays the trigger source currently selected. Different labels
are displayed when different trigger source are selected and the color of the trigger
parameter area will change accordingly.
Trigger condition : Displays the current trigger condition.
Trigger coupling : Displays coupling mode (DC/AC/LF Reject/HF Reject) of the
current trigger source.
Trigger level : Displays the trigger level value of the current waveform.
Press down the knob to reset the parameter to 50% of the waveform.
10. Channel Setup
Probe attenuation factor : Displays currently selected probe attenuation factor. All
factors are: 0.1X/0.2X/0.5X/1X/1000X/2000X/5000X/10000X.
Input impedance : Displays currently selected impedance (1MΩ/50Ω) of the
channel.
Channel coupling : Displays the selected coupling mode of the current channel.
All modes are: DC/AC/GND.
Vertical Scale : Represents the voltage value of each grid on the vertical axis
of the screen.
11. Trigger Level Label
Displays position of the current channel trigger level. Press down the knob to reset the
level to vertical center of the waveform.
12. I/O status
Indicate that the USB Device (USBTMC) is connected.
Indicate that the USB Host is connected.
Indicate that the LAN port is connected. Indicate it is disconnected.
13. Menu
Display menus of the currently selected function module. Press any menu softkey to
perform corresponding setting.
Loading ...
Loading ...
Loading ...