Loading ...
Loading ...
Loading ...
SIGLENT
SDS2000X User Manual 167
To Output Arbitrary Waveform
1. Press the Wave Gen button on the front panel to enable the AWG function and enter
the WAVEFORM function menu.
2. Connect the SDS2000X with PC which has installed the EasyWave software using a
USB cable.
3. Double click the EasyWave icon to open the program.
4. Select a waveform file or draw an arbitrary waveform; then click the Send wave option
which at the bottom of the interface and it will pop-up the dialogue which shows as the
picture below:
Figure 99: Send Wave Dialogue
5. Click the Store location area and select the location to keep the arbitrary waveform.
6. Click the Send option, then the oscilloscope will pop-out the message ―Dealing with
waveform data, please wait…‖
7. A few seconds later the oscilloscope will prompt ―Succeed to save waveform‖, and it
will enter the WAVEFORM function menu, the Wave Type sets to ArbX (the location
chose above)
Figure 100:AWG Menu
8. To delete the arbitrary waveform, press the Delete softkey.
9. Press the Setting softkey to enter the SETTING function menu.
10. Press the OutputLoad softkey to select High-Z or 50Ω.
Loading ...
Loading ...
Loading ...