Loading ...
Loading ...
Loading ...
Error codes Error message Solution
71.01 Fax Station Name not set
up. Contact system
administrator.
See
“Setting up the fax function using
analog fax” on page 29.
71.02 Fax Station Number not set
up. Contact system
administrator.
71.03 No analog phone line
connected to modem, fax is
disabled.
Check the connection and the line for
a signal. For more information, see
“Setting up fax using a standard
telephone line” on page 32.
71.06 Unable to connect to HTTPS
Fax Server.
Connection to HTTPS Fax Server is
disconnected. Check the Internet
connection of the printer.
71.12 Memory full, cannot print
faxes.
Tou ch Print All to print as many of the
faxes as have been saved.
71.13 Memory full. Cannot send
faxes.
Try one or more of the following:
• Continue and try sending the fax
again.
• Scan the original document one
page at a time, dial the fax
number, and then scan the
document.
72.01 E-mail SMTP server not set
up. Contact system
administrator.
Try either of the following:
• Set up your e‑mail function. For
more information, see
“Configuring the e‑mail SMTP
settings” on page 38.
• Disable the error message. For
more information, see
“Disabling
the 'SMTP server not set up' error
message” on page 239.
84.00, 84.01, 84.02, 84.09 Imaging unit nearly low. Tou ch Continue to clear the
message.
84.11, 84.12, 84.13, 84.19 Imaging unit low.
84.21, 84.22, 84.23, 84.29 Imaging unit very low.
84.31, 84.32, 84.33 Replace imaging unit,
recommended life exceeded.
See
“Replacing the imaging unit” on
page 163.
84.41, 84.42, 84.43 Replace imaging unit to
continue printing.
88.00, 88.09 Cartridge nearly low. Tou ch Continue to clear the
message.
88.10, 88.19 Cartridge low.
88.20, 88.29 Cartridge very low.
88.40, 88.48 Replace cartridge, 0 pages
remain.
See
“Replacing the toner cartridge”
on page 161.
Troubleshoot a problem 186
Loading ...
Loading ...
Loading ...