Loading ...
Loading ...
Loading ...
48
All required work must be carried out before the service indicators are
reset. Failure to do so may result in incorrect service values and cause
DTCs to be stored by the relevant control module.
NOTE
For some vehicles, the scan tool can reset additional service lights such
as maintenance cycle and service interval. On BMW vehicles for an
example, service resets include engine oil, spark plugs, front/rear brakes,
coolant, particle filter, brake fluid, micro filter, vehicle inspection, exhaust
emission inspection and vehicle check.
All software screens shown in this manual are examples, actual test
screens may vary for each vehicle being tested. Observe the menu
headings and on-screen instructions to make correct selections.
To perform oil reset functions
1. Tap the Service application button from the MaxiCOM Job Menu.
2. Tap Oil Reset button. The vehicle manufacturer screen displays.
Tap VIN Scan or the vehicle make to acquire vehicle VIN
information and tap Yes to confirm. See Vehicle Identification on
page 21 for detail.
3. Tap the desired function in the Oil Reset function list. The list may
vary by test vehicle.
4. Follow the step-by-step on-screen instruction to complete the
service. Using CBS vehicle date correction as an example.
Figure 5- 1 Sample Oil Function List
Loading ...
Loading ...
Loading ...