Loading ...
Loading ...
Loading ...
SERVICE
&
MAINTENANCE INSTRUCTIONS
Hydraulic Hoses and Fittings
1.
Hydraulic hoses are severely worked on a
backhoe. Examine them daily and replace
if
necessary. Hose routing is very important.
Make certain hoses can move freely, without
kinking, and cannot be damaged or cut by
backhoe action.
2.
When tightening hoses and fittings, always use
two wrenches: one to hold hose and one to
tighten the fitting. This will prevent hose from
twisting and kinking.
3.
Always back locknut
off
and screw fitting all the
way in for fittings that must be positioned and
that use O
-
rings for sealing. Then hold in
position and tighten locknut. Fittings with
O
-
rings and flange do not require additional
sealant, replace damaged O
-
rings.
-1
Teflon tape should be used to
seal pipe threads. Use care when applying
Teflon Tape to prevent It from entering the
hydraulic system.
Notes
C
37
Loading ...
Loading ...
Loading ...