Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
GENERAL ASSEMBLY
INSTRUCTIONS
Backhoe assembly is the responsibility of the
Honda Power Equipment Compact Tractor Dealer.
The backhoe should be delivered to the owner
completely assembled, lubricated and adjusted for
normal operating conditions.
Set up with these instructions and illustrations.
!
BA
When finished with
assembly, complete the following check
lists.
Failure
to
complete
all
checklists could cause
serious injury
or
death
to
the operator.
Pre-Deliveiy Check List
Inspect the backhoe thoroughly after assembly
to
be certain it is set up properly before delivering
it
to the customer. The check lists are a reminder of
points to inspect. Check
off
each item as it is found
satisfactory or after proper adjustments are made.
Check all bolts to be sure they are tight.
c]
Check that all lubrication points have been
lubricated.
c]
Check that all cotter pins and safety pins are
properly installed.
Check that the 'backhoe and sub
-
frame are
properly attached to tractor and front end
loader sub
-
frame.
c]
Check that
all
adjustments have been made.
c]
Check that hydraulic reservoir has been
serviced and that hydraulic system and all
functions have been operated through full
cylinder stroke to purge air from system.
0
Make sure
all
hydraulic fittings are tight and
there are no leaks in hydraulic system.
0
Refer to the safety instructions on pages
9
and
10
before checking for hydraulic leaks.
Delivery Check List
c]
Show customer how to make adjustments.
c]
Explain importance
of
lubrication and show
lubrication points to customer.
c]
Give Operator's Manual to customer and
recommend that all operators become familiar
with all sections and especially the safety
information.
Daily Check List
Check that the backhoe and .sub-frame are
properly and securely attached to the tractor
and front end loader sub
-
frame.
During inspection, check that all nuts and bolts
are secure and clevis pins are properly cotter
pinned.
0
Check for hydraulic leaks, frayed or worn hoses
and general safety of hydraulic system.
Refer
to
the safety
Instructions
on
page
9
and
10
before checking
for hydraulic leaks.
12
Loading ...
Loading ...
Loading ...