Loading ...
Loading ...
Loading ...
Jnstamnation nstructions (continued)
_:e_ _ (continued)
Light The Pigots
_me
Heater pilot flame
4. Turn the OVEN CONTROL knob to a setting above
200°F (93°C). The pilot flame will increase in size
and impinge on the temperature-response element.
The oven burner will tight in 30-90 seconds,.
The oven burner will operate until the set temperature
is reached,. The oven burner will continue to cycle on
and off as necessary to maintain the oven at the tem-
perature indicated by the OVEN CONTROL knob.
Check Ignition of Surface Burners
Surface Burner ignition
Operation of all cooktop and oven burners should be
checked after the pilots have been lighted (on some
models) and range and gas supply lines have been
carefully checked for leaks.
Standing PHot ModeBs
Select a top burner knob and simultaneously push in
and turn to HI position_ The burner should light within
a few seconds,. Try each burner in succession until all
burners have been checked.
Etectric _gnition ModeRs
Select a top burner knob and simultaneously push in
and turn to L1TE position° You will hear a snapping
sound indicating proper operation of the spark mod-
ule., Once the air has been purged from the supply
lines, burners should light within 4 seconds. After
burner lights, rotate knob out of the LITE position. Try
each burner in succession until all burners have been
checked°
Quality of Flames
The combustion quality of burner flames needs to be
determined visually,.
(A) Yellow flamesmCatl
for service
(B) Yellow tips on outer
cones--Normal for LP
gas
(C) Soft blue flames--
Normal for natural gas
If burner flames look like (A), call for service. Normal
burner flames should look like (B) or (C), depending
on the type of gas you use.
With LP gas, some yellow tipping on outer cones is
norma!..
7
Check Ignition of Oven Burner
Your oven is designed to operate quietly and automati-
cally. To operate the oven, turn the OVEN CONTROL
knob to a setting above 200°F (93°C). After 30_90 sec-
onds, the oven burner will ignite and burn until the set
temperature is reached.. The oven burner will continue
to cycle on and off. as necessary to maintain the oven at
the temperature indicated by the OVEN CONTROL
knob°
Electric ignition models require electrical power to
operate.. The oven cannot be lit during a power
outage. Gas will not flow Unless the glow bar is hoL
if the oven is in use when a power outage occurs, the
oven burner will shut off and cannot be re-lit until
power is restored.
34
Loading ...
Loading ...
Loading ...