Operating Instructions / Owner’s Manual - Page 230

For HC-X2. Also, The document are for others Panasonic models: HC-X20, HC-X2GGD, HC-X20GGD

Loading ...
Loading ...
Loading ...
Playback Playing back clips
230
Playback from touch operations and operation icons
(A) Direct playback bar
Playback operation Operating procedure
Playback/pause Touch .
Fast-reverse playback Touch . Touch twice to increase the speed.
Fast-forward playback Touch . Touch twice to increase the speed.
Stop (return to thumbnail screen) Touch .
Skip playback
(cue up of the clip)
Touch the LCD monitor while playing back, and slide from right to left (left to right).
When sliding from left to right, the clip skips to the beginning of the previous clip if the current
playback position of the clip is at less than 3 seconds from the beginning. The clip skips to the
beginning of the current clip if the current playback position of the clip is at 3 seconds or more
from the beginning.
Slow playback
Touch and hold while paused.
( is reverse slow playback)
When is touched, slow playback is performed with continuous frame-by-frame playback.
When is touched, playback returns to normal.
The frame-by-frame interval and the display time for each frame for the reverse slow playback
differ depending on the type of the clip.
Frame-by-frame playback
Touch while paused.
( is reverse frame-by-frame playback)
When is touched, playback returns to normal.
The frame-by-frame interval for reverse frame-by-frame playback differs depending on the
type of the clip.
Direct playback
Touch the direct playback bar, or slide it while touching.
The playback video is paused during the operation. Playback is started by releasing the finger.
If the operation icons are displayed but not touched for a while, the operation icons disappear. To display again, touch the
screen.
Operations of the unit or some performance may become slow for the clip with large file size.
Operations of the unit or some performance may become slow when there are large number of clips on the memory card.
Playback will stop once by switching the card slot when the [THUMBNAIL] menu
¨ [PLAYBACK] ¨ [CLIP SEL] ¨ [ALL
SLOT]/[SAME FORMAT] is set, and then the clips of all the memory cards are displayed. Playback is not possible across 2
memory cards.
Playback stops when the memory card is removed during playback.
During playback of a clip, playback may be suspended or black screen may be displayed due to switching of a clip.
Motion picture compatibility
This unit is based on AVCHD Progressive/AVCHD.
Even if the devices used have compatible standards, when playback of clip recorded using another device is performed
using this device, or when clip recorded using this device is played back in another device, playback may not proceed
normally, or may not be possible. (Please check compatibility in the instruction manual of your device.)
Clips recorded with devices other than this unit are not supported by this unit.
TCR 12:59:59:23
CH1
CH2
(A)
Loading ...
Loading ...
Loading ...