Loading ...
Loading ...
Loading ...
Overview – Description of Parts
20
(A) With a microphone holder attached
(53) Wireless LAN transmitter
(54) Shoulder belt loop
(55) <AUDIO INPUT1> terminal (XLR, 3-pin) (ÎAttaching the external microphone: 38, Audio input: 182)
Connects an audio equipment or an external microphone.
(56) Lens hood release button (
ÎAttaching the lens hood: 36)
(57) Status indicator (
ÎTurning the unit on/off: 41)
Illuminates when power is on.
(58) Power switch (
ÎTurning the unit on/off: 41)
Switch the power on/off.
(59) REC button (on the grip) (
ÎShooting: 142)
Starts or stops the recording.
It is possible to directly record from the thumbnail mode.
(60) Fan inlet
Fan inlet for cooling fan. Do not block this while the unit is being used.
(61) <AUDIO INPUT2> terminal (XLR, 3-pin) (
ÎAttaching the external microphone: 38, Audio input: 182)
Connects an audio equipment or an external microphone.
(62) Microphone holder mounting section (
ÎAttaching the external microphone: 38)
Attaches the supplied microphone holder with the microphone holder mounting screws.
(63) Built-in speaker
Outputs audio during playback.
Audio is not output from the built-in speaker when headphones are connected to the headphone terminal.
(64) Microphone cable clamp (
ÎAttaching the external microphone: 38)
Fixes the external microphone cable.
(65) Grip belt (
ÎAdjusting the grip belt: 36)
(66) Microphone holder (
ÎAttaching the external microphone: 38)
Secures the external microphone in place.
(67) Buckle (
ÎAttaching the external microphone: 38)
Used to open and close the microphone holder.
(68) <DC IN 12V> terminal (
ÎCharging the battery: 31)
Connects the supplied AC adaptor and supplies an external power.
(57)
(58)
(59)
(61)
(65)
(62)
(64)
(63)
(66)
(67)
(A)
(56)
(55)
(54)(53)
(60)
X20X2
(71)
(72)
(71)
(68)
(69)
(69)
(68)
(70)
Loading ...
Loading ...
Loading ...