Loading ...
Loading ...
Loading ...
Using the zoom function – Adjusting the zoom position
170
Using i.ZOOM
When [i.ZOOM] is set to [ON], you can zoom to a maximum of approximately 32× (approximately 24× when recording with UHD)
while maintaining the beauty of high-definition image quality.
1
Select the [CAMERA] menu ¨ [SW MODE] ¨ [i.ZOOM] ¨ [ON].
• You can set [i.ZOOM] in a USER button so that you can use iZoom. (
ÎAssigning functions to the USER buttons: 65)
• The zoom ratio display changes.
(For example)
– iZ00 to iZ99: Optical zoom range
– Z99: In iZoom
Using fast zoom
When [FAST ZOOM] is assigned to a USER button, you can use fast zoom by operating the zoom lever (on the grip).
1
Select the [CAMERA] menu ¨ [USER SW] ¨ [USER1] to [USER14] ¨ [FAST ZOOM].
2
Either press the USER button assigned to [FAST ZOOM] or touch the USER button
icon.
3
Push the zoom lever (on the grip) until the end to zoom.
• The zoom ratio display changes during fast zoom. (For example: 99)
• When the [CAMERA] menu ¨ [SW MODE] ¨ [H.ZOOM SPEED] is set to [7], fast zoom can also be used by operating the
zoom lever (on the handle).
• As the operating noise of fast zoom will be louder than normal, the operating noise may be recorded during recording. If the
operating noise is a problem, disable [FAST ZOOM].
• Auto focus may not be able to keep up during fast zoom, depending on the subject.
• Fast zoom cannot be used in the following case:
– When interval recording is enabled
Loading ...
Loading ...
Loading ...