Operating Instructions / Owner’s Manual - Page 192

For HC-X2. Also, The document are for others Panasonic models: HC-X20, HC-X2GGD, HC-X20GGD

Loading ...
Loading ...
Loading ...
Special recording function Variable frame rate (VFR) recording function/super slow recording function
192
(Variable frame rate recording/super slow recording)
In the following cases, this cannot be set.
When set to an item that does not support [FILE FORMAT] or [REC FORMAT]
When using the face detection/tracking AE&AF function
The [CAMERA] menu
¨ [SW MODE] ¨ [AF SPEED] and [AF SENSITIVITY] will operate in [0].
The [RECORDING] menu
¨ [TC/UB] ¨ [FREE/REC RUN] is fixed to [REC RUN].
The following functions are canceled.
Dynamic range stretcher function (
ÎDynamic range stretcher function: 214)
Flash band compensation function(ÎFlash band compensation (FBC) function: 219)
Pre-recording (
ÎPre-recording: 195)
[2 SLOTS FUNC.] (
ÎRelay recording: 196 to Dual codec recording [X2]: 200)
Interval recording (ÎInterval recording: 202)
[HYBRID O.I.S.] (
ÎSwitching enable/disable of the hybrid optical image stabilizer function: 213)
It is not possible to adjust the shutter speed to a value slower than the limit imposed by the frame rate used for variable
frame rate recording/super slow recording.
The recording is paused when ten hours has past from the time the recording was started. The recording is automatically
resumed after few seconds.
When performing high-speed (slow motion) shooting, the recording time will be shorter than 10 hours depending on the
ratio of the frame rate of the recording format and the variable frame rate. The recording will stop in 5 hours when the
frame rate of [REC FORMAT] is set to 23.98p and the [SCENE FILE] menu
¨ [FRAME RATE] is set to [48fps].
It may take time to stop recording even if recording is stopped right after recording is started.
When set to a 59.94p recording format and [SCENE FILE] menu ¨ [FRAME RATE] is set to [2fps], recording continues for
up to 30 seconds so that the clip length after recording reaches 1 second.
There are recording functions that cannot be used simultaneously. (
ÎRecording function that cannot be used
simultaneously: 297
)
(Variable frame rate recording)
Audio cannot be recorded with the variable frame rate recording. Audio can be recorded, however, if the set frame rate is
the same frame rate as [REC FORMAT].
When [SUPER SLOW] is [ON], variable frame rate recording cannot be set.
The screen may be disrupted or become dark when the frame rate setting is changed.
The frame rate cannot be changed while recording.
When recording at a low frame rate setting, it may be difficult for the camera to keep up with changes in the images. If this
occurs, use the manual settings for the iris, focus, and white balance mode.
(Super slow recording)
Audio cannot be recorded with the super slow recording.
When [SUPER SLOW] is [ON], the unit will restart after the following operation.
If changed to an item that does not support [FILE FORMAT] or [REC FORMAT]
Loading ...
Loading ...
Loading ...