LG Electronics WCEP6427F 6.4 Cu. Ft. PrintProof Stainless Steel Smart Combination Wall Oven

Owner's Manual - Page 71

For WCEP6427F. Also, The document are for others LG Electronics models: WCEP6427*

PDF File Manual, 164 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
71TROUBLESHOOTING
ENGLISH
Parts & Features
Oven will not steam
cook (On some
models)
The drain in the water tank may be clogged with hard water scale.
If this happens, the descaling function must be run before the steam function can be used.
Water pools in the
bottom of the oven
during or after
steam cooking (On
some models)
During steam cooking, the water in the water tank is transferred to the bottom of the
oven.
It is normal for water to fill the bottom of the oven during or after the Steam mode.
If the water leaves mineral deposits on the oven bottom, remove the deposits with a cloth
or sponge soaked in vinegar.
White residue
appears on the oven
bottom after steam
cooking (On some
models)
Using hard water in the water tank can result in hard water scale on the oven bottom.
To remove mineral deposits that remain on the oven bottom, use a cloth or sponge soaked
in vinegar or a weak citric acid solution.
The sous vide
module beeps during
operation (On some
models)
This alert sounds when the sous vide module is operated without water in the steam
feeder tank.
Fill the steam feeder tank to the recommended level before using
Problem Possible Cause & Solution
Oven control beeps
and displays any F
code error.
Electronic control has detected a fault condition.
Turn off the oven function you are using to clear the display and stop beeping. Reprogram
oven. If fault recurs, record fault number and call for service.
- [Case 1 ]
Code: F-9
Cause: Oven not heating (upper oven)
- [Case 2 ]
Code: F-19
Cause: Oven not heating (lower oven)
k is on in the display
when you want to
cook
The oven door is locked because the temperature inside the oven has not dropped
below the locking temperature.
Press the STOP button. Allow the oven to cool.
Oven light does not
work.
It is time to replace the bulb or the bulb is loose.
Replace or tighten bulb. See "Changing the Oven Light" section in this Owner’s Manual.
Cooling fan
continues to run
after oven is turned
off.
The fan turns off automatically when the electronic components have cooled
sufficiently.
This is normal.
Oven will not Self
Clean.
The oven temperature is too high to set a Self Clean operation.
Allow the appliance to cool and reset the controls.
Oven controls improperly set.
See the Self Clean section.
A Self Clean cycle cannot be started if oven door is open.
Close the oven door.
Oven door does not
open after a Self
Clean cycle
Oven is too hot.
Allow the oven to cool below locking temperature.
Problem Possible Cause & Solution
en-us_main.book.book Page 71 Tuesday, January 31, 2023 5:37 PM
Loading ...
Loading ...
Loading ...