Tripp Lite PDU3EVSR1L2130 NEW series 8.6kW 200-240V 3-Phase IsoBreaker Managed PDU - Gigabit, 36 Outlets, L21-30P Input, LCD, 10 ft. 3 m Cord, 0U, 70 in. 1.8 m Height, TAA

Owner's Manual 3-Phase Monitored & Switched 0U PDUs Multi-Language - Page 4

For PDU3EVSR1L2130 NEW.

PDF File Manual, 200 pages, Read Online | Download pdf file

PDU3EVSR1L2130 NEW photo
Loading ...
Loading ...
Loading ...
4
Important Safety Instructions
• Do not connect the PDU to an ungrounded outlet or to extension cords or
adapters that eliminate the connection to ground.
• The plug on cord-connected models serves as the disconnect device.
Be sure to provide an easily accessible local disconnect device on any
models that are permanently installed
without a plug.
• Never attempt to install electrical equipment during a thunderstorm.
• Individual equipment connected to the PDU should not draw more current
than the individual PDU’s outlet’s rating.
• The total load connected to the PDU must not exceed the maximum load
rating for the PDU.
• Do not attempt to modify the PDU, input plugs or power cables.
• Do not drill into or attempt to open any part of the PDU housing. There
are no user-serviceable parts inside.
• Do not attempt to use the PDU if any part of it becomes damaged.
• Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness is
not recommended.
Loading ...
Loading ...
Loading ...