Loading ...
Loading ...
Loading ...
36
Troubleshooting
Event Log and Descriptions
Event Log Message Message Occurs When…
Bootload Mode It entered Bootload mode
Breaker 1 Open Breaker 1 is open
Breaker 2 Open Breaker 2 is open
Breaker 3 Open Breaker 3 is open
Breaker 4 Open Breaker 4 is open
Breaker 5 Open Breaker 5 is open
Breaker 6 Open Breaker 6 is open
Firmware Update The firmware has been updated
Line out of range The line voltage is out of expected range
Notable Relay
Response Time
Relay timeout is set outside of allowed range
Outlet too near max
rating
The load current applied to the outlet is causing
the outlet to approach its max rating
Outlet turned off due
to overcurrent
The ISO breaker turns off outlet due to
overcurrent
System Startup The unit is powering up and the system goes into
idle mode
Thd out of range THD is out of range
Transfer to firmware
mismatch fault
The firmware description from the Slave micro
does not match what's stored in the Master
micro
Transfer to idle Unit transitioned to Idle mode
Transfer to line Unit transitioned to Line mode
Transfer to line; partial
powerup
Unit transitioned to Line Partial Powerup mode
Transfer to reboot Unit transitioned to Reboot mode
Transfer to standby Unit transitioned to Standby mode
Transfer to standby idle Unit transition to Standby Idle mode
Loading ...
Loading ...
Loading ...